'65 Jetstar 88 Speedo hookup.

macvic · 03-23-2008, 03:34 PM

Hi,

Ok, I scored a NOS speedo cable for my Jetstar and have it pretty much installed. I am missing on more part of the puzzle - it looks like I need a special bearing dust cover for the driver side - since the cable is run off the front wheel hub. I assume it has some kind of provision built into it to drive the cable. The dust cover currently installed does not seem to. I will check the passenger side in case they were swapped at sometime. Does anyone know what they look like and more importantly, does anyone know where a guy could possibly get one?

Thanks for your help.

Greg.

rocketraider · 03-23-2008, 07:07 PM

You can get one from any 63-70 fullsize Olds in a junkyard. LH cap.

It has a center shaft inside that mates to the cable's square drive end. Quick ID is that there is a raised diamond-shaped plate on the outside. You probably also need the radio static eliminator that snaps inside the grease cap.

joe_padavano · 03-24-2008, 06:47 AM

Quote:

Originally Posted by rocketraider

You can get one from any 63-70 fullsize Olds in a junkyard. LH cap.

Have you checked any junkyards lately? 80s G-body cars are getting tough to find (at least here in NoVA). 60s cars are pretty much non-existent.

aliensatemybuick · 03-24-2008, 07:06 AM

I beleive this is what you need:

http://cgi.ebay.com/ebaymotors/Oldsm...spagenameZWDVW

rocketraider · 03-24-2008, 09:27 AM

Joe, that's because you're too close to DC.

Out here in the hinterlands, there's still stuff in the yards.

Plus MD has that inventory tax that makes the junkyards crush everything, so no need to go there. The Cap City guys were howling about that 20 years ago. Leon's in Culpeper is yall's best bet. Only junkyard I ever went in that they gave you a map. Without it, I expect you could get good and lost in there.

I bought an NOS pair off the bay last week. Scott's link is the second pair I've seen on there recently. Though why one needs two at the time...

I have 2 64 Starfires so there's a spare for each.

Took the blue one in for inspection around 1988, the last one before I put YOM plates on it, and when they pulled the LF wheel to check brakes, the kid doing the inspection didn't know about indexing the cap to the speedo cable. Ended up dinging the cable to where speedo woudn't work so I made 'em find me a new cable.

Greg, make sure that hasn't happened to yours.

joe_padavano · 03-24-2008, 11:40 AM

Quote:

Originally Posted by rocketraider

...Leon's in Culpeper is yall's best bet. Only junkyard I ever went in that they gave you a map. Without it, I expect you could get good and lost in there....

Ah, Leon's, The Walking Man's Friend...

I have to admit, I've been frequenting Crazy Ray's yards more recently. Culpeper is a long way from Northern Loudoun County, unfortunately.

aliensatemybuick · 03-24-2008, 04:37 PM

Wow, found another one just now without even trying (literally stumbled over it during a reg. search). I'd go for the NOS pair! Point is though, they're not too hard to find.

http://cgi.ebay.com/ebaymotors/1965-...spagenameZWDVW

macvic · 03-27-2008, 04:10 PM

Thanks guys,

I snagged the ones off of ebay.(Sorry if I outbid anyone). I will keep my eyes for spares. It has been a good month - first I got the speedo cable, now these.

Thanks again.

Greg.

03-23-2008, 03:34 PM	#1 (permalink)
macvic Junior Member Join Date: Sep 2006 Location: Quispamsis, NB, Canada Posts: 7	'65 Jetstar 88 Speedo hookup. Hi, Ok, I scored a NOS speedo cable for my Jetstar and have it pretty much installed. I am missing on more part of the puzzle - it looks like I need a special bearing dust cover for the driver side - since the cable is run off the front wheel hub. I assume it has some kind of provision built into it to drive the cable. The dust cover currently installed does not seem to. I will check the passenger side in case they were swapped at sometime. Does anyone know what they look like and more importantly, does anyone know where a guy could possibly get one? Thanks for your help. Greg. Last edited by macvic : 03-23-2008 at 03:41 PM.

03-23-2008, 07:07 PM	#2 (permalink)
rocketraider Oldsdruid Join Date: Dec 2007 Location: Danville Vajenya, the Last Capital of Dixie Posts: 283	You can get one from any 63-70 fullsize Olds in a junkyard. LH cap. It has a center shaft inside that mates to the cable's square drive end. Quick ID is that there is a raised diamond-shaped plate on the outside. You probably also need the radio static eliminator that snaps inside the grease cap. __________________ I know absolutely nothing about Oldsmobiles. Just ask the owner of Oldspower.com

03-24-2008, 09:27 AM	#5 (permalink)
rocketraider Oldsdruid Join Date: Dec 2007 Location: Danville Vajenya, the Last Capital of Dixie Posts: 283	Joe, that's because you're too close to DC. Out here in the hinterlands, there's still stuff in the yards. Plus MD has that inventory tax that makes the junkyards crush everything, so no need to go there. The Cap City guys were howling about that 20 years ago. Leon's in Culpeper is yall's best bet. Only junkyard I ever went in that they gave you a map. Without it, I expect you could get good and lost in there. I bought an NOS pair off the bay last week. Scott's link is the second pair I've seen on there recently. Though why one needs two at the time... I have 2 64 Starfires so there's a spare for each. Took the blue one in for inspection around 1988, the last one before I put YOM plates on it, and when they pulled the LF wheel to check brakes, the kid doing the inspection didn't know about indexing the cap to the speedo cable. Ended up dinging the cable to where speedo woudn't work so I made 'em find me a new cable. Greg, make sure that hasn't happened to yours. __________________ I know absolutely nothing about Oldsmobiles. Just ask the owner of Oldspower.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering wheel horn hookup	silverriff	Interior/Upholstery	2	02-25-2008 06:10 PM
35 speedo	gwgarage	Parts For Sale	1	01-16-2008 07:29 AM
35 speedo	gwgarage	Parts For Sale	0	06-14-2007 01:45 PM
'65 Jetstar 88 Speedo question	macvic	Transmission	3	03-10-2007 08:31 PM
Speedo Cable	VegasDelta	Parts Wanted	2	10-12-2006 04:48 PM

03-24-2008, 07:06 AM	#4 (permalink)
aliensatemybuick Member Join Date: Jul 2007 Posts: 45	I beleive this is what you need: http://cgi.ebay.com/ebaymotors/Oldsm...spagenameZWDVW

03-24-2008, 04:37 PM	#7 (permalink)
aliensatemybuick Member Join Date: Jul 2007 Posts: 45	Wow, found another one just now without even trying (literally stumbled over it during a reg. search). I'd go for the NOS pair! Point is though, they're not too hard to find. http://cgi.ebay.com/ebaymotors/1965-...spagenameZWDVW

03-27-2008, 04:10 PM	#8 (permalink)
macvic Junior Member Join Date: Sep 2006 Location: Quispamsis, NB, Canada Posts: 7	Thanks guys, I snagged the ones off of ebay.(Sorry if I outbid anyone). I will keep my eyes for spares. It has been a good month - first I got the speedo cable, now these. Thanks again. Greg.