ISO 350 or 455 engine Illinois
October 9th, 2021, 10:05 AM
#1
Registered User
Thread Starter
Join Date: Sep 2021
Posts: 26
ISO 350 or 455 engine Illinois
Looking for a mild built 350 to drop in while I build mine up or possibly a 455 engine ready to drop in. I’m located in central Illinois so the closer the better. also looking for 7111 rpm intake if you have one for a 350
Thanks guys
Thanks guys
Last edited by 71benchseat; October 9th, 2021 at 10:10 AM.
November 13th, 2021, 05:14 AM
#3
Registered User
Thread Starter
Join Date: Sep 2021
Posts: 26
Looking for olds 350
Looking for a solid running olds 350/ located in Illinois but will travel within in reason. Thanks
Also interested in a 455
Also interested in a 455
Last edited by 71benchseat; November 14th, 2021 at 09:03 AM.
December 12th, 2021, 10:27 AM
#6
Registered User
Join Date: Apr 2012
Location: Bradenton, FL
Posts: 1,468
I have one . Can get it to Joliet if you can take a ride up there. OR if you have a business address with a forklift, that would be cheapest.
It's a rebuilt '71 350. Low compression, .030 over. Edelbrock Camshaft. 60psi oil pressure cold. I have a video of it running. I have a set of 7a (1972) heads that would go with it but they need to be rebuilt. I'll even include the RPM intake. I have Hedman headers as well.
It's a rebuilt '71 350. Low compression, .030 over. Edelbrock Camshaft. 60psi oil pressure cold. I have a video of it running. I have a set of 7a (1972) heads that would go with it but they need to be rebuilt. I'll even include the RPM intake. I have Hedman headers as well.
December 29th, 2021, 07:13 AM
#7
Registered User
Join Date: Apr 2012
Location: Bradenton, FL
Posts: 1,468
Thread
Thread Starter
Forum
Replies
Last Post
