Looking for 1975 Cutlass passenger side exterior door handle
June 25th, 2022, 02:02 PM
#1
Registered User
Thread Starter
Join Date: Mar 2021
Posts: 8
Looking for 1975 Cutlass passenger side exterior door handle
I am looking for a 1975 Cutlass (two-door) passenger side exterior door handle. It should measure about 6.25 inches in length. If you have one in good shape let me know. Thanks!
June 26th, 2022, 07:45 AM
#3
Registered User
Join Date: Apr 2019
Location: Las Cruces NM 88005
Posts: 908
Good question. Am guessing though that there is general interchange between ALL Colonnade models, 73-77. Whether that same part was carried over into the "downsized" Metric chassis introduced in Fall '77 is a good question.
June 27th, 2022, 07:06 PM
#5
Registered User
Join Date: Apr 2012
Posts: 261
GM changed the handles mid 76- 5/8" or so shorter, i believe.
A friend has a 77 starfire that he says came with the bigger handles.
Both L and R are hard to come by, but the R is really scarce. They weren't used as much as the left, so they didn't make as many spares.
I searched for years before I found a pair at the OCA Nat in Des Moines. Now I'm searching for spares too..
A friend has a 77 starfire that he says came with the bigger handles.
Both L and R are hard to come by, but the R is really scarce. They weren't used as much as the left, so they didn't make as many spares.
I searched for years before I found a pair at the OCA Nat in Des Moines. Now I'm searching for spares too..
Thread
Thread Starter
Forum
Replies
Last Post
