69-72 3 Core Radiator Top Plate Powder coated
#1
69-72 3 Core Radiator Top Plate Powder coated
This is a three core radiator top plate for 69-72 cars with a fan shroud. It is correct for 69/70 but will work on 71/72 also. It has been powder coated gloss black. It looks like the bolts were over tightens so the metal around the bolt holes is a little warped and there are some minor scratches. Looking for $75 plus shipping.
#6
HEY Joel,
Do you still have this plate?
I have a 1972 with a modified 350: HD long water pump; 6 blade HD fan, thermo fan clutch.
However it is a non- AC car I want to add a shroud to, so I need to change my radiator top plate on my 3 row rad.
I've been told by some reputable Olds guys that I need Part # 407116.
Is this the one you have. If yes, can you measure the plate from the front ( grille saddle) to the back ( closest to the water pump) and let me know how many inches it is?
Do you still have this plate?
I have a 1972 with a modified 350: HD long water pump; 6 blade HD fan, thermo fan clutch.
However it is a non- AC car I want to add a shroud to, so I need to change my radiator top plate on my 3 row rad.
I've been told by some reputable Olds guys that I need Part # 407116.
Is this the one you have. If yes, can you measure the plate from the front ( grille saddle) to the back ( closest to the water pump) and let me know how many inches it is?
#8
Sorry for the delay. I do have this piece still available. I also have one on my car and one of the 71/72 versions which is identical except the ears on the tank saddles are trimmed off. None of them have a part number on them, and they all measure the same. 10 1/2 inches from front to back. The more crucial measurement would be between the mounting bolts and the radiator saddles, as that would set the top of your radiator. That number is around 5 1/2 from center of bolt hole to center of the radiator. From your pictures in your other thread it looks like the measurement from center of the mounting bolts to radiator is close to the same as your current non-shroud top plate. The one you purchased that measure 9 3/4 from what I can see in your pictures looks identical to the ones I have except mine measure 10 1/2. Maybe yours was shortened on the grill side, or maybe it’s a different application that’s looks the same.
#9
Hi Joel, I thought I had replied to this thread. You have one in restored condition for a 3 row that's 10.5"? any picture?
selling it ? price to ship to NJ 07607 ?
Sounds like you dont have the rubber saddles but I can get them online.
selling it ? price to ship to NJ 07607 ?
Sounds like you dont have the rubber saddles but I can get them online.
Thread
Thread Starter
Forum
Replies
Last Post
costpenn
General Questions
5
July 5th, 2016 03:08 AM
Ryan McManus
Parts Wanted
1
October 29th, 2015 09:59 PM