Bernhard

Will a 1966 GTO control arms fit a 1969 Cutlass?
I know that the 69 cutlass and 442 A arms use a oval bushing in the lower. What year arms are the same across the GM A body? Is there any issues going from the oval to the round bushing control arms?
Thanks

Bernhard

Will a 1966 GTO control arms fit a 1969 Cutlass?
I know that the 69 cutlass and 442 A arms use a oval bushing in the lower. What year arms are the same across the GM A body? Is there any issues going from the oval to the round bushing control arms?
Thanks

joe_padavano

The oval and round bushing arms will interchange. The only difference is that the oval bushings provide more compliance in the fore-aft direction for a smoother ride over bumps and potholes (with the downside that the increased compliance will make handling less precise).

joe_padavano

Once again, posting the same question in multiple forums is not a good choice. It's in your own best interest to keep all responses in a single thread.

Bernhard

Thanks for the reply and for combining the threads.